Mineraluxe pH pLUS increaser allows sanitiziers to work more effectively by mantaining a ph level of between 7.4-7.8. Proper pH levels prevents corrosion and scale formation on hot tub and swim spa surfaces and heater elements.
Mineraluxe pH Plus Application:
- Test pH Weekly and adjust if required.
- If pH is below 7.2 add 12 grams per 1,000 liters.
- Let water circulate for 20 minutes.
- Re test and repeat until pH falls into proper range.
Always apply pH Plus by sprinkling slowly over water surface. Run pumps with air controls off.